---

There are two steps to install your Speed Touch 330 modem:
- 1: Installation of your ADSL modem drivers.
- 2: Manual configuration of a TELE2 connection to the Internet.

The following steps explain how to install your ST330 modem in Windows Vista.

NOTE: Do not connect your modem before completing Step 10.

>> STEP 1/18
Insert the installation CD-Rom into your drive.

>> STEP 2/8
Window Vista's Autoplay windows opens.
Click on the Run Setup.exe link.



>> STEP 3/18
The Choose Setup Language window appears.
Select your language, for example, English.
Click on OK.



>> STEP 4/18
The installation assistant for your ADSL modem starts.
Click on Next.



>> STEP 5/18
The Software License Agreement window appears.
Read the software license agreement.
If you accept the license, click on Yes.



>> STEP 6/18
The Choose Destination Location window appears.
Leave the destination folder as the default. Click on Next



>> STEP 7/18
The Select Program Folder window appears.
Leave the information entered as the default.
Click on Next



>> STEP 8/18
The decompression of your ADSL modem drivers starts.
Wait for a few moments.



>> STEP 9/18
The Setup Complete window appears.
Click on Finish.



>> STEP 10/18
Connect your ADSL modem to your computer's USB port.


>> STEP 11/18
Windows Vista detects your modem.
Balloons provide information on the progress of the peripheral's installation and are located to the lower right of the screen.
Wait while Windows Vista installs your ADSL modem.



Your ADSL modem has been successfully installed.
You must now create a connection to the Internet.

>> STEP 12/18
Click on Start (represented by a flag to the lower left).
Click on Connect to.


>> STEP 13/18
The configuration assistant starts.
Click on the Set up a Connection or Network link.



>> STEP 14/18
The Choose a connection option window appears.
Click on the Set up a dial-up connection option, then on Next.



>> STEP 15/18
The Type the information from your Internet service provider (ISP) window appears.
Fill in the following fields:

Dial-up phone number:	The telephone number provided by TELE2.
User name:	The connection identifier provided by TELE2.
Password:	The connection password provided by TELE2.
Connection name:	A name for the connection.

NOTE: The information shown in the picture might not be accurate in your country.

Click on Create.



>> STEP 16/18
The The connection to the Internet is ready to use window appears.
An Internet connection test is performed.



>> STEP 17/18
The Set Network Location window appears.
Select Home for a connection at home.
A User Account Control warning message may appear depending on your computer's options; in this case, click on Continue or enter your Administrator's password.



>> STEP 18/18
A window appears that indicates that the configuration is successful.
Click on Close.



Your ST 330 modem is successfully installed and your Internet connection is successfully created.